GlassCast 50

Due to shipping regulations we can currently only ship this Resin within the UK. Please do not purchase this if the shipping destination is outside the UK.

GlassCast 50 is formulated for casting layers up to 25mm in wood ( 50mm for other materials ).

Ideal for casting resin for hybrid blanks to create stunning looking spheres and hollow forms.

Add the GlassCast range of colour dyes, colour pigments or metallics to create some stunning effects.

The GlassCast 50 casting resin is also used for creating the stunning looking river tables.

You can cast Glasscast 50 in layers for deeper fills. Why not add different colours to each layer to create another type of effect.

The best why to get great results with any cold pour casting resin is to weigh when mixing so check out our resin weigh scales.

For the best finish the surface may need to be flattened and polished once set.

• Water like clarity, best in class.
• UV stable, will not degrade with sunlight.
• Disperses air bubbles.
• Turn or polish once set, get a perfect finish.
• Will not shrink.
• VOC free.

At 20°C you should allow at least 72 hours before attempting to remove the your casting mould if you used one or to perform any kind of work on the resin surface.

Ensure that dirt and dust cannot come into contact with the resin during the first 48 hours. The surface will still feel soft at that time but it shouldn’t be susceptible to absorbing anything that falls onto it, though it may still be marked if you touch it.

Allow about 7 days for GlassCast 50 to fully harden.

You can view or download the full spec sheet here: GlassCast 50 Specification Sheet

Prices have a carrier charge built in to the larger sizes of resin.