James Barry Diamond Files

Use any of these James Barry Diamond Files with the Lapping Fluid to extend the life of the tool and give better results.

 

Machinist Double Sided Flat File – Out of stock

The double sided flat file features a Coarse 300 grit (50 Micron) on one side and a Fine 600 grit (25 Micron) on the other. Good for sharpening Gouges, Scrapers and Skews.

Overall length is 178mm, the file width is 20mm. It tapers from 10mm thick down to 6.35mm at the flat tip.

 

6″ Diamond Taper File

A 600 grit (25 Micron) pointed file. Overall length is 270mm and the thickness tapers from 4.3mm to 1.8mm. Good for carbide tipped tools.

3″ Diamond Taper File

A 400 grit (35 Micron) pointed file. Overall length is 180mm and the thickness tapers from 2.5mm to 1.5mm. Good for carbide tipped tools.

 

3″ Mini Diamond Taper File

This smaller tapered file is 150mm long and the thickness starts at 3mm and tapers to 1.8mm at the tip. Great for tackling tricky sharpening projects.