Sovereign Ultima Hollowing System with Handle

This Sovereign Ultima Hollowing System includes a handle ( also available without ) and is a high end hollowing tool with a specially designed self clearing cutting head. The depth of the cut can be finely adjusted as required by loosening the tip and using the knurled adjusted to move the tip shield in and out.  The head has a fully adjustable linkage system so you can hollow out various design shapes.

Why not check ot the Hamlet Big Brother Hollowing system Here

The SOV16S-ULTS is the smaller of the two models of Sovereign Ultima Hollowing System with handle and is suitable for hollowing up to depths of 11″ (280mm).

This system consists of:

• 16″ (400mm) handle.
• Cutter.
• Torx key.
• 2 Allen keys.
• 3/8″ (10mm) & 1/2″ (13mm) Collets.

The SOV22S-ULTM is the larger of the two models and is suitable for hollowing up to depths of 16″ (400mm).

This system consists of:

• 22″ (560mm) handle.
• Cutter.
• Torx key.
• 2 Allen keys.
• 3/8″ (10mm) & 1/2″ (13mm) Collets.

You can extend the handle on the SOV16S Sovereign Ultima Hollowing System. Simply remove the end cap and screw in additional lengths of handle.